Aspire Puxos Kit

Aspire Puxos Kit

Product Code: Puxos Kit
Availability: In Stock

Available Options

* Colour:

Aspire Puxos Kit - Featuring the Cletio Pro Tank

Aspire now brings you the ultimate in mod adaptability and flexibility. Introducing the new Puxos Kit. It allows for use with three different battery types, an 18650, a 20700 or a 21700. it also comes with the all new Aspire Cleito Pro tank, which is just as flexible as it accepts coils from Cleito and Cleito Exo tanks. The Puxos can be used in various modes, allowing you to select between Wattage, Voltage, Bypass, CPS (C1/C2/C3), TC(Ni/Ti/SS316L) and TCR(M1/M2/M3).

Not only is it flexible in terms of battery type and coils, now Aspire has gone even further by providing a full 14 different colour and style options!

Kit Dimensions

A very portable kit that is comfortable to hold and fits equally well in purse or pocket.

Choose from 14 different styles and finishes, from plain colours to contemporary designs, ‘snap on’ magnetic side panels/ battery covers, are fully interchangeable and available to purchase separately to truly customise your mod depending on your own style or even mood.Choose form plain colours black, silver, white, blue, gold, red and pink. You could even mix and match your side panels.

Cleito Pro Exploded View

The Cleito Pro tank can be fully disassembled for cleaning and maintenance.

Cleito Pro Filling

Now even easier to fill thanks to a top side-fill slot – no need to unscrew. Slide up the top ring to reveal the filling slot and fill with your preferred e-liquid.

Cleito Pro coil Installation

Fitting or replacing the coils in the Cleito Pro couldn’t be simpler, unscrew the Delrin drip tip, remove the top section, then unscrew and remove the coil (if fitted) and screw in the new coil. Remember to let the coil stand for a few minutes to thoroughly saturate the wicking material before vaping.

Battery Installation

Remove the magnetic side panel and insert the battery of your choice, an 18650 (use the supplied adapter), a 20700 or a 21700. Insert the battery negative post down as seen in the diagram and replace the side pane

Dual output modes

* when using an 18650 battery, it must be mounted in the supplied adapter.
* When using a 20700 battery, select the same output as 21700 battery.

Puxos Mod Safety Features

The Puxos kit comes with all the safety features that Aspire is famous for.

Charging couldn't be easier, just attach the supplied micro usb cable to the charging port and attach to a power supply. When you connect your Puxos mod to the charger the screen will display a growing battery icon. When the battery charge reaches 4.2V or is fully charged, the mod will stop charging and the screen will remain off. The maximum charging rate is 2 amps.

Puxos Kit Contents

1 x Puxos mod
1 x Cleito Pro tank(2ml)
2 x Coils (0.5Ω)
6 x O-rings
1 x USB Cable
1 x 21700 battery
1 x 18650 battery adapter preinstalled
1 x Warning card
1 x User manual
1 x Warranty card



Write a review

Your Name:

Your Review:

Note: HTML is not translated!

Rating: Bad Good

Enter the code in the box below:

Related Products


Payment methods

© 2020 Liquid eCig UK t/a Aspire eCig UK